EMIF06-SD03F3 Datasheet, PDF (1/23 Pages) STMicroelectronics – 6-line IPAD™, EMI filter and ESD protection for SD card

EMIF06-SD03F3
6-line IPAD™, EMI filter and ESD protection for SD card
Features
■ ESD protection (IEC standard)
■ EMI Filtering
■ Level translator
■ Signal conditionning
■ Integrated power supply with:
– Thermal shutdown (TSD)
– Under voltage lockout (UVLO)
– Short-circuit current limitation (I_SC)
– Power on/off feature with Enable pin
Benefits
■ EMI Low-pass-filter and ESD protection (up to
15 kV on external pins)
■ Integrated pull up resistors prevent bus floating
■ 50 MHz clock frequency compatible with
C_line< 40 pF
■ Lead-free package in 400 µm pitch
■ Low power consumption
■ Very low PCB space consumption
■ High reliability offered by monolithic integration
■ Reduction of parasitic elements thanks to CSP
integration
Complies with the following standards:
■ IEC 61000-4-2, Level 4: External pins
– 15 kV (air discharge)
– 8 kV (contact discharge)
■ HBM IEC 61340-3-1: All pins
– 2 kV (air discharge)
– 2 kV (contact discharge)
TM: IPAD is a trademark of STMicroelectronics.
Flip Chip
(24 bumps)
Figure 1. Pin configuration (bump side)
54321
A
B
C
D
E
Applications
■ Removable memory cards in mobile phones,
communication systems, and portable
applications
■ Memory cards compliant with: SD (standard
and high speed), MiniSD, µSD and
MMC/Trans-flash standards
Description
The EMIF06-SD03F3 is a highly integrated
device, based on IPAD technology, combining the
5 functions described under Features.
February 2010
Doc ID 15194 Rev 2
1/23
www.st.com
23