EMIF06-10006F2 Datasheet, PDF (1/9 Pages) STMicroelectronics – 6 line EMI filter and ESD protection

IPAD™
EMIF06-10006F2
6 line EMI filter and ESD protection
Main product characteristics
Where EMI filtering in ESD sensitive equipment is
required:
■ Mobile phones and communication systems
■ Computers, printers and MCU Boards
Description
The EMIF06-10006F2 is a highly integrated
device designed to suppress EMI/RFI noise in all
systems subjected to electromagnetic
interference. The EMIF06 Flip-Chip packaging
means the package size is equal to the die size.
This filter includes an ESD protection circuitry
which prevents damage to the application when
subjected to ESD surges up 15 kV. This device
includes 6 EMIF filters.
Benefits
■ EMI symmetrical (I/O) low-pass filter
■ High efficiency in EMI filtering
■ Lead free package
■ Very low PCB space consumption
2.92 mm x 1.29 mm
■ Very thin package: 0.65 mm
■ High efficiency in ESD suppression
(IEC 61000-4-2 level 4)
■ High reliability offered by monolithic integration
■ High reduction of parasitic elements through
integration and wafer level packaging
®
Flip-Chip
(15 Bumps)
Order code
Part Number
EMIF06-10006F2
Marking
FT
Figure 1. Pin configuration (bump side)
987
654
32 1
I6 I5 I4 I3 I2 I1 A
Gnd
Gnd
Gnd
B
O6 O5 O4 O3 O2 O1 C
Complies with the following standards:
IEC 61000-4-2 level 4:
15 kV (air discharge)
8 kV (contact discharge)
MIL STD 883E - Method 3015-6 Class 3: 30 kV
TM: IPAD is a trademeark of STMicroelectronics
November 2006
Rev 4
1/9
www.st.com
9