EMIF02-USB05C2 Datasheet, PDF (1/7 Pages) STMicroelectronics – 2 line EMF filter including ESD protection

IPAD™
EMIF02-USB05C2
2 line EMF filter including ESD protection
Main application
When EMI filtering is ESD sensitive equipment is
required:
■ Mobile phones and communication systems
■ Computers, printers and MCU boards
Description
The EMIF02-USB05C2 is a highly integrated
array designed to suppress EMI / RFI noise for
USB port filtering. The EMIF02-USB05C2 Flip-
Chip packaging means the package size is equal
to the die size.
Additionally, this low-pass filter includes an ESD
protection circuitry to prevent damage to the
application when subjected to ESD surges up
to 15 kV.
This device is designed to be fully compatible with
USB standards.
Benefits
■ 2 x EMI low-pass filter + 2 line ESD protection
■ 1.5 kΩ pull-up included
■ High efficiency in EMI filtering
■ Lead free coated package
■ Very low PCB space consumption:
1.92 mm x 0.92 mm
■ Very thin package: 0.69 mm
■ High reliability offered by monolithic integration
■ High reduction of parasitic elements through
integration and wafer level packaging
■ USB full speed (12 Mbps), OTG compliant
Complies with following standards:
IEC 61000-4-2
level 4
15 kV (air discharge)
8 kV (contact discharge)
MIL STD 883G - Method 3015-7 Class 3
Coated Flip-Chip
(8 Bumps)
Pin configuration (bump side)
21
IO4 VCC A
O2 I2 B
O1 I1 C
IO3 GND D
Functional diagram
IO4
IO3
Input 2
R3
R1
VCC
Output2
GND
R2
Input 1
Output 1
Order code
Part Number
EMIF02-USB05C2
Marking
GV
TM: IPAD is a trademark of STMicroelectronics
November 2006
Rev 2
1/7
www.st.com
7