EMIF02-USB03F2 Datasheet, PDF (1/7 Pages) STMicroelectronics – 2 LINES EMI FILTER INCLUDING ESD PROTECTION

®
IPAD™
EMIF02-USB03F2
2 LINES EMI FILTER
INCLUDING ESD PROTECTION
PRODUCT CHARACTERISTICS
ESD protection and EMI filtering for:
■ USB OTG port
DESCRIPTION
The EMIF02-USB03F2 is a highly integrated array
designed to suppress EMI / RFI noise for USB
OTG (On The Go).
The EMIF02-USB03F2 Flip-Chip packaging means
the package size is equal to the die size.
Additionally, this filter includes an ESD protection
circuitry which prevents the protected device from
destruction when subjected to ESD surges up to
15 kV on external contacts.
Flip-Chip
(11 Bumps)
Figure 1: Pin Configuration (ball side)
BENEFITS
■ 2 lines low-pass-filter + 2 lines ESD protection
■ High efficiency in EMI filtering
■ Lead Free package
■ Very low PCB space consuming: < 3.25 mm²
■ Very thin package: 0.65 mm
■ High efficiency in ESD suppression
(IEC61000-4-2 level 4)
■ High reliability offered by monolithic integration
■ High reducing of parasitic elements through
■ integration and wafer level packaging.
COMPLIES WITH THE FOLLOWING STANDARDS:
IEC61000-4-2
Level 4 on external pins 15kV (air discharge)
8kV (contact discharge)
Level 1 on internal pins 2kV (air and contact
discharge)
Table 1: Order Code
Part Number
EMIF02-USB03F2
Marking
FU
321
ID
Dz
Vbus Pup
Pd1
D+
out
Pd2
D+
in
D-
out
GND
D-
in
Figure 2: Schematic
EMIF02-USB03F2
D+OUT
D-OUT
R2=33Ω
R1=33Ω
CC
R5=15kΩ
Pup
R3=1.3kΩ
R4=17kΩ
Pd2
Pd1
Cline = 20 pF max.
A
B
C
D
Dz ID Vbus
D+IN
D-IN
TM: IPAD is a trademark of STMicroelectronics.
October 2004
REV. 3
1/7