EMIF02-MIC06F3 Datasheet, PDF (1/8 Pages) STMicroelectronics – 2-line IPAD™ EMI filter and ESD protection

EMIF02-MIC06F3
2-line IPAD™ EMI filter and ESD protection
Features
■ 2-line symmetrical low-pass filter
■ Lead-free package
■ Very low PCB space consuming: < 1.5 mm²
■ Very thin package: 0.65 mm
■ High efficiency in ESD suppression
IEC 61000-4-2 level 4
■ High reliability offered by monolithic integration
■ High reduction of parasitic elements through
integration and wafer level packaging
Complies with the following standards
■ IEC 61000-4-2 level 4:
– 15 kV (air discharge)
– 8 kV (contact discharge)
Application
■ Mobile phones (differential microphone filtering
and ESD protection)
Description
The EMIF02-MIC06F3 is a highly integrated
device designed to suppress EMI/RFI noise for
dual microphone line filtering.
The EMIF02-MIC06F3 Flip-Chip packaging
means the package size is equal to the die size.
That's why EMIF02-MIC06F3 is a very small
device.
Additionally, this filter includes an ESD protection
circuitry which prevents damage to the application
when subjected to ESD surges up to 15 kV.
Lead-free Flip-Chip package
(8 bumps)
Figure 1. Pin configuration (bump side)
321
MIC
Bias
ECI
A
Op
n
Gnd
Mic2p
B
On
A
Gnd
Mic2n
C
TM: IPAD is a trademark of STMicroelectronics.
September 2011
Doc ID 15195 Rev 4
1/8
www.st.com
8