EMIF02-MIC03F2 Datasheet, PDF (1/6 Pages) STMicroelectronics – 2 LINE EMI FILTER AND ESD PROTECTION

®
IPAD™
EMIF02-MIC03F2
2 LINE EMI FILTER
AND ESD PROTECTION
MAIN PRODUCT CHARACTERISTICS:
Where EMI filtering in ESD sensitive equipment is
required :
■ Mobile phones and communication systems
■ Computers, printers and MCU Boards
DESCRIPTION
The EMIF02-MIC03 is a highly integrated device
designed to suppress EMI/RFI noise in all systems
subjected to electromagnetic interferences. The
EMIF02 Flip-Chip packaging means the package
size is equal to the die size.
This filter includes an ESD protection circuitry
which prevents damage to the application when
subjected to ESD surges up 15 kV.
BENEFITS
■ EMI symmetrical (I/O) low-pass filter
■ High efficiency in EMI filtering
■ Very low PCB space consuming:
1.07 mm x 1.47 mm
■ Very thin package: 0.65 mm
■ High efficiency in ESD suppression
■ High reliability offered by monolithic integration
■ High reducing of parasitic elements through
integration & wafer level packaging
COMPLIES WITH THE FOLLOWING STANDARDS:
IEC 61000-4-2
Level 4 on input pins 15 kV (air discharge)
8 kV (contact discharge)
Level 1 on output pins 2 kV (air discharge)
2 kV (contact discharge)
MIL STD 883E - Method 3015-6 Class 3
Flip-Chip package
PIN CONFIGURATION (bump side)
321
I2
I1
A
GND
B
O2 O1 C
BASIC CELL CONFIGURATION
Low-pass Filter
Input
Output
Ri/o = 68 Ω
Cline = 100 pF
GND
GND
GND
TM: IPAD is a trademark of STMicroelectronics.
October 2004
REV. 1
1/6