EMIF02-MIC02F3 Datasheet, PDF (1/8 Pages) STMicroelectronics – 2-line IPAD, EMI filter including ESD protection

EMIF02-MIC02F3
2-line IPAD™, EMI filter including ESD protection
Features
■ EMI symmetrical (I/O) low-pass filter
■ High efficiency EMI filtering
■ Lead-free package
■ Very low PCB space consumption: 0.9 mm²
■ Very thin package: 0.60 mm
■ High efficiency ESD suppression
■ High reliability offered by monolithic integration
■ High reduction of parasitic elements through
integration and wafer level packaging
Complies with the following standards
■ IEC61000-4-2 level 4 on external pins:
– 15 kV (air discharge)
– 8 kV (contact discharge)
■ IEC61000-4-2 level 1 on internal pins:
– 2 kV (air discharge)
– 2 kV (contact discharge)
Applications
Where EMI filtering in ESD sensitive equipment is
required:
■ Mobile phones and communication systems
■ Computers, printers and MCU Boards
Description
The EMIF02-MIC02F3 is a highly integrated
device designed to suppress EMI/RFI noise in all
systems subjected to electromagnetic
interference.
This filter includes ESD protection circuitry, which
prevents damage to the protected device when
subjected to ESD surges up 15 kV.
Flip Chip
(6 bumps)
Figure 1. Pin layout (bump side)
32 1
E2 GND E1
A
I2 GND I1
B
Figure 2. Basic cell configuration
Low-pass Filter
I1
E1
I2
E2
GND
GND
GND
Ri/o = 470 Ω
Cline = 16 pF
April 2008
TM: IPAD is a trademark of STMicroelectronics.
Rev 2
1/8
www.st.com