ECMF02-3F3 Datasheet, PDF (1/12 Pages) STMicroelectronics – Common mode filter with ESD protection

ECMF02-3F3
Common mode filter with ESD protection
Flip Chip
6 bumps
Features
 Very large differential bandwidth
 Very low PCB space consumption
 High ESD robustness: IEC 61000-4-2 level 4
 Withstand 1000 ESD strikes
 Lead-free Flip-Chip package
 Small footprint
 Very low profile
Complies with the following standard:
 IEC 61000-4-2 level 4:
– 15 kV (air discharge)
– 8 kV (contact discharge)
Applications
Where transient overvoltage protection in ESD
sensitive equipment is required such as:
 Mobile phones
 Computers
 Portable navigation devices
 Digital still cameras
 Portable multimedia players
Datasheet  production data
Figure 1. Pin configuration (bump side)
12
A
B
C
Figure 2. Schematic (bump side)
A1
DP_int
ESD 2kV
B1
DM_int
ESD 2kV
A2
DP_ext
ESD 15kV
B2
DM_ext
ESD 15kV
C1
GND
C2
ID
ESD 15kV
Description
The ECMF02-3F3 is a highly integrated common
mode filter designed to suppress EMI/RFI
common mode noise on high speed differential
serial buses.
TM: IPAD is a trademark of STMicroelectronics.
December 2013
This is information on a product in full production.
DocID023283 Rev 3
1/12
www.st.com
12