CPL-WB-01D3 Datasheet, PDF (1/10 Pages) STMicroelectronics – Wide-band directional coupler with ISO port

CPL-WB-01D3
Wide-band directional coupler with ISO port
Features
■ 50 Ω nominal input / output impedance
■ Wide operating frequency range
(824 MHz to 2170 MHz)
■ Low insertion loss (< 0.2 dB)
■ 26 dB coupling factor
■ High directivity
■ High ESD robustness
(IEC 61000-4-2 Level 4)
■ Flip-Chip package
■ Small footprint
Benefits
■ Very low profile
■ Lead-free package
■ High RF performance
■ RF module size reduction
Applications
■ Quad-band power amplifier module
■ Quad-band front end module
■ GSM / WCDMA mobile phone
Flip-Chip package 6 bumps
Figure 1. Pin configuration (top view)
3
2
RF_{OUT GND}
1
RF_IN
A
B
ISO GND CPLD
Description
The CPL-WB-01D3 is a wide-band directional
coupler designed to measure RF antenna output
power in GSM / WCDMA / TD-SCDMA
applications. This CPL has been customized for
wide band operating frequencies (EGSM and
CELL, PCS, DCS, TD-SCDMA, WCDMA Band I)
with less than 0.2 dB insertion losses in the
transmit bandwidth (824 MHz to 2170 MHz).
The CPL-WB-01D3 has been designed using
STMicroelectronics IPD (integrated passive
device) technology on non-conductive glass
substrate to optimize RF performance. The device
is delivered 100% tested in tape and reel.
February 2012
Doc ID 019036 Rev 3
1/10
www.st.com
10