CBTVS2A12-1F3 Datasheet, PDF (1/7 Pages) STMicroelectronics – Circuit breaker with transient voltage suppressor

CBTVS2A12-1F3
Circuit breaker with transient voltage suppressor
Flip Chip
(4 bumps)
Figure 1. Pin configuration (bump side)
AB
1
2
Figure 2. Configuration^(a)
&KDUJHULQSXW
7R3RZHU0DQDJHPHQW,&
$
$
1RQUHVHWWDEOHIXVH
Datasheet - production data
Features
• Transient voltage suppressor (TVS)
• Non-resettable over current protection (OCP)
• Electrostatic discharge protection
• Electrical overstress protection (OVP)
• Unidirectional device
• Fast response time
• Very thin package: 0.4 mm
• High ESD protection level
• High integration
• Suitable for high density boards
Complies with the following standards:
• IEC 61000-4-2 level 4:
– ±15 kV (air discharge)
– ±15 kV (contact discharge)
Description
The CBTVS2A12-1F3 is a single line diode TVS
integrating a fuse designed specifically for the
protection of integrated circuits in portable
equipment and miniaturized electronics devices
subject to ESD, OVP and OCP.
%
*1'
%
*1'
a. B1 and B2 bumps must be grounded on the PCB
together.
May 2014
This is information on a product in full production.
DocID026350 Rev 1
1/7
www.st.com