BLUENRG-MS Datasheet, PDF (1/42 Pages) STMicroelectronics – Upgradable Bluetooth Low Energy network processor

BlueNRG-MS
Upgradable Bluetooth^® Low Energy network processor
Datasheet - production data
Features
• Bluetooth specification v4.1 compliant
master and slave single-mode Bluetooth low
energy network processor
• Embedded Bluetooth low energy protocol
stack: GAP, GATT, SM, L2CAP, LL, RF-
PHY
• Bluetooth low energy profiles provided
separately
• Operating supply voltage: from 1.7 to 3.6 V
• 8.2 mA maximum TX current (@0 dBm, 3.0
V)
• Down to 1.7 µA current consumption with
active BLE stack
• Integrated linear regulator and DC-DC step-
down converter
• Up to +8 dBm available output power (at
antenna connector)
• Excellent RF link budget (up to 96 dB)
• Accurate RSSI to allow power control
• Proprietary application controller interface
(ACI), SPI based, allows interfacing with an
external host application microcontroller
• Full link controller and host security
• High performance, ultra-low power Cortex-
M0 32-bit based architecture core
• Upgradable BLE stack (stored in embedded
Flash memory, via SPI)
• AES security co-processor
• Low power modes
• 16 or 32 MHz crystal oscillator
• 12 MHz ring oscillator
• 32 kHz crystal oscillator
• 32 kHz ring oscillator
• Battery voltage monitor
• Compliant with the following radio frequency
regulations: ETSI EN 300 328, EN 300 440,
FCC CFR47 Part 15, ARIB STD-T66
• Available in QFN32 (5 x 5 mm) and
WLCSP34 (2.66 x 2.56 mm) packages
• Operating temperature range:
-40 °C to 85 °C
Applications
• Watches
• Fitness, wellness and sports
• Consumer medical
• Security/proximity
• Remote control
• Home and industrial automation
• Assisted living
• Mobile phone peripherals
• PC peripherals
Table 1: Device summary
Order code
Package
BLUENRG-MSQTR
QFN32
(5 x 5 mm)
BLUENRG-MSCSP
WLCSP34
(2.66 x 2.56 mm)
Packing
Tape and
reel
Tape and
reel
February 2016
DocID027103 Rev 6
1/42
www.st.com