BALF-CC26-05D3 Datasheet, PDF (1/8 Pages) STMicroelectronics – 50(ohm) nominal input / conjugate match balun CC2610, CC2620, CC2630, CC2640, CC2650 MHz, with integrated harmonic filter

BALF-CC26-05D3
50 Ω nominal input / conjugate match balun CC2610, CC2620,
CC2630, CC2640, CC2650 MHz, with integrated harmonic filter
Datasheet - production data
Features
 2.45 GHz balun with integrated matching
network
 Matching optimized for CC26 series 5×5
external differential
 Low insertion loss
 Low amplitude imbalance
 Low phase imbalance
 Coated Flip-Chip on glass
 Small footprint < 1.5 mm²
Benefits
 Very low profile
 High RF performance
 PCB space saving versus discrete solution
 RF BOM and size reduction
 Efficient manufacturability
Description
STMicroelectronics' BALF-CC26-05D3 is an
ultra-miniature balun, integrating both matching
network and harmonics filter.
Matching impedance has been customized for
the TI CC26xx series 5x5 SimpleLink™
multistandard wireless MCU.
The device uses STMicroelectronics' IPD
technology on a non-conductive glass substrate,
which optimizes RF performance.
Figure 1: Pin configuration
Figure 2: Block diagram
Not necessary if internal bias is used
Pin 3/4_RX/TX
Pin 2_RFN
Pin 1_RFP
BALF-CC26-05
Antenna (50 Ω)
July 2016
DocID029603 Rev 1
This is information on a product in full production.
1/8
www.st.com