BALF-112X-02D3 Datasheet, PDF (1/12 Pages) STMicroelectronics – 50 ohm nominal input / conjugate match balun CC1120, CC1125, 433 MHz, with integrated harmonic filter

BALF-112X-02D3
50 ohm nominal input / conjugate match balun CC1120,
CC1125, 433 MHz, with integrated harmonic filter
Datasheet - production data
Features
 50 Ω nominal input / conjugate match to
CC1120, CC1125, CC1175, CC1200
 Low insertion loss
 Low amplitude imbalance
 Low phase imbalance
 Small footprint
Benefits
 Very low profile (< 630 μm thickness)
 High RF performance
 RF BOM and size reduction
Applications
 433 MHz impedance-matched balun filter
optimized for Texas Instruments® CC1120,
CC1125, CC1175, CC1200 sub-GHz RFICs
Description
STMicroelectronics' BALF-112X-02D3 is an ultra-
miniature balun, integrating both matching
network and harmonics filter.
Matching impedance has been customized for
the CC1120, CC1125, CC1175 and CC1200
transceivers from Texas Instruments.
The device uses STMicroelectronics' IPD
technology on a non-conductive glass substrate,
which optimizes RF performance.
Figure 1: Application schematic
Optional
XOSC/
TCXO
(Optional
control pin
from CC1121)
Vdd
Vdd
1
VDD_GUARD
2
RESET_N
3
GPIO3
4
GPIO2
5
DVDD
6
DCPL
7
SI
8
SCLK
MCU connection SPI
interface and optional
gpio pins
Texas
CC1121
24
LPF1
23
LPF0
22
AV DD_SYNTH1
21
DCPL_VCO
20
LNA_N
19
LNA_P
18
TRX_SW
17
PA
Vdd
C10
L11
C44
R13
Antenna
(50Ω)
July 2016
DocID029426 Rev 1
This is information on a product in full production.
1/12
www.st.com