ANT3-M24LR-A Datasheet, PDF (1/3 Pages) STMicroelectronics – SMD-inductor based antenna reference board for the M24LR64-R Dual Interface EEPROM

ANT3-M24LR-A
SMD-inductor based antenna reference board
for the M24LR64-R Dual Interface EEPROM
Data brief
Features
■ Ready-to-use printed circuit board (PCB)
including
– 4.7 µH SMD inductor acting as an RF
antenna
– An I²C connector
Description
The ANT3-M24LR-A antenna reference board is a
ready-to-use PCB that features an M24LR64-R
Dual Interface EEPROM IC connected to a 4.7 µH
SMD inductor on one side, and to an I²C bus on
the other side. The SMD inductor acts as a
13.56 MHz RF antenna.
The ANT3-M24LR-A allows system designers to
evaluate the M24LR64-R IC performance and
capabilities, and to get started with their design.
The reference board Gerber files are available
from http://www.st.com.
Figure 1. ANT3-M24LR-A block diagram
!.4 -,2 !
3-$INDUCTOR
)#CONNECTOR
August 2010
Doc ID 17855 Rev 1
For further information contact your local STMicroelectronics sales office.
AI
1/3
www.st.com
3