AN4212 Datasheet, PDF (1/11 Pages) STMicroelectronics – PowerSSO-24 devices evaluation board

AN4212
Application note
PowerSSO-24 devices evaluation board
Introduction
The EV board concept is intended to provide customers with an easy way to connect ST's
surface mounted VIPower^® drivers into their existing prototype circuitry. The EV boards
come pre-assembled with one of ST's VIPower high-side drivers.
Figure 1. PowerSSO-24 evaluation board
These boards provide mounting solutions and some heat sinking capability for prototype
development. There are still external components required to make these devices work in
any application.
Figure 2. PowerSSO-24 package
This document provides application schematics for the following evaluation boards:
Table 1. Evaluation board
12 V digital devices
EV-VND5E050K
EV-VNQ5E160K
EV-VNQ5E050K
12 V analog devices
EV-VND5E025AK
EV-VNQ5E050AK
EV-VNQ5E160AK
EV-VNQ5027AK
24 V system device
EV-VND5T035AK
December 2012
Doc ID 023983 Rev 1
1/11
www.st.com