AN4210 Datasheet, PDF (1/12 Pages) STMicroelectronics – PowerSSO-12 devices evaluation board

AN4210
Application note
PowerSSO-12 devices evaluation board
Introduction
The EV board concept is intended to provide customers with an easy way to connect ST's
surface mounted VIPower^® drivers into their existing prototype circuitry. The EV boards
come pre-assembled with one of ST's VIPower high-side drivers.
Figure 1. PowerSSO-12 evaluation board
These boards provide mounting solutions and some heat sinking capability for prototype
development. There are still external components required to make these devices work in
any application.
Figure 2. PowerSSO-12 package
This document provides application schematics for the following evaluation boards:
Table 1. EV board
12 V analog devices
EV-VN5016AJ
EV-VN5E025AJ
EV-VN5E050AJ
EV-VND5E050AJ
EV-VND5E160AJ
12 V digital devices
EV-VN5E050J
EV-VND5E050J
EV-VND5E160J
24 V system device
EV-VND5T100AJ
December 2012
Doc ID 023963 Rev 1
1/12
www.st.com