AN4206 Datasheet, PDF (1/34 Pages) STMicroelectronics – Getting started with STM32F3 series hardware development

AN4206
Application note
Getting started with STM32F3 series hardware development
Introduction
This application note is intended for system designers who require a hardware
implementation overview of the development board features such as the power supply,
clock management, reset control, boot mode settings and debug management. It explains
how to use the STM32F3xx product lines and describes the minimum hardware resources
required to develop an application based on STM32F3 series.
The STM32F3x8 line devices with their disabled embedded regulator share many
features/peripherals with the STM32F301, STM32F302, STM32F303 and STM32F334 line
devices, which embedded regulator is enabled, with some differences.
A summary of the differences between the product lines is provided in Section 6.
A detailed reference design schematic is also contained in this document with descriptions
of the main components, interfaces and modes.
February 2015
DocID023944 Rev 4
1/34
www.st.com
1