AN4127 Datasheet, PDF (1/27 Pages) STMicroelectronics – This document describes the STEVAL-SPBT3ATV3 demonstration board

AN4127
Application note
Demonstration board for Bluetooth^® module class 2
SBT2632C2A.AT2
Introduction
This document describes the STEVAL-SPBT3ATV3 demonstration board (dongle) for the
Bluetooth^® class 2 SPBT2632C2A.AT2 module.
The dongle includes the module under evaluation, an RF antenna, and a USB connector.
The USB connector is used to connect the dongle with a PC, to access the Bluetooth
module and to supply the dongle.
The STEVAL-SPBT3ATV3 is an easy solution to test and operate with the
SPBT2632C2A.AT2 module and familiarize the user with the embedded FW which enables
the creation of a Bluetooth link with simple AT commands. The AT command list is detailed
in the UM1547 user manual.
This document introduces the main technical characteristics of the dongle and includes a
quick start guide to get started with the STEVAL-SPBT3ATV3.
Dongle features:
■ Based on V3.0 Bluetooth class 2 module, SPBT2632C2A.AT2
■ USB interface and power supply
■ Supported reprogrammability via USB interface
■ Reset button
■ Antenna onboard
■ RoHS compliant
Figure 1. STEVAL-SPBT3ATV3 dongle
June 2012
Doc ID 023304 Rev 1
1/27
www.st.com