AN3961 Datasheet, PDF (1/46 Pages) STMicroelectronics – STEVAL-IME003V1 demonstration board based on the STHV748 ultrasound pulser

AN3961
Application note
STEVAL-IME003V1 demonstration board based on the
STHV748 ultrasound pulser
Introduction
The STEVAL-IME003V1 demonstration board is based on the STHV748, a state-of-the-art
4-channel ultrasound pulser for ultrasound imaging applications.
The output waveforms can be displayed directly on an oscilloscope by connecting the scope
probe to the relative BNCs. 16 preset waveforms are available to test the HV pulser under
varying conditions.
Figure 1. STHV748 ultrasound pulser demonstration board (STEVAL-IME003V1)
Warning:
Before applying any voltage supply to the STEVAL-IME003V1,
please read carefully the instructions contained in this
document.
May 2014
DocID022083 Rev 3
1/46
www.st.com