AN3412 Datasheet, PDF (1/15 Pages) STMicroelectronics – The STEVAL-CCA028V1 is a demonstration board designed

AN3412
10 W +10 W dual BTL class-D audio amplifier demonstration board
based on the TDA7491P
Introduction
The STEVAL-CCA028V1 is a demonstration board designed for the TDA7491P dual BTL
class-D audio amplifier. This application note provides the board specifications and a quick-
start list for standalone operation. Also included are the schematic, printed circuit board
layout and bill of material.
Due to its high efficiency, the device assembled in the PSSO36 (slug-down) package is
capable of dissipating heat without any heatsink. Jumpers on the board allow configuring
the amplifier in order to verify all the features as single-ended or differential inputs, fixed gain
settings. Microswitches are also provided to enable the standby and mute functions.
The main features of the TDA7491P include:
■ 10 W +10 W continuous output power at THD =10%, R_L = 6 Ω, V_CC = 11 V
■ 9.5 W +9.5 W continuous output power at THD = 10%, R_L = 8 Ω, V_CC =12 V
■ Wide-range, single-supply operation (5 V - 18 V)
■ High efficiency (η = 90%)
■ Four selectable, fixed gain settings (20 dB, 26 dB, 30 dB and 32 dB)
■ Differential inputs to minimize common-mode noise
■ Filterless operation
■ Standby and mute features
■ Short-circuit and thermal overload protections
■ Externally synchronizable
Figure 1. STEVAL-CCA028V1
June 2011
Doc ID 018920 Rev 1
1/15
www.st.com