AN3321 Datasheet, PDF (1/8 Pages) STMicroelectronics – How to enable remote reset from JTAG on

AN3321
Application note
How to enable remote reset from JTAG on
EVALSPEAr310 board rev 2.0
Introduction
This application note provides information on how to modify the evaluation board for
SPEAr310 (EVALSPEAr310) rev 2.0 to enable remote system reset through the JTAG
interface.
Remote reset is a feature not available by default on EVALSPEAr310 board, but it can help
during software debug activity.
November 2010
Doc ID 18275 Rev 1
1/8
www.st.com