|
AN316 Datasheet, PDF (1/17 Pages) STMicroelectronics – clamping protection mode | |||
|
AN316
Application note
Transilâ¢
clamping protection mode
Introduction
The Transil(a) is an avalanche diode specially designed to clamp over voltages and dissipate
high transient power. A Transil has to be selected in two steps:
⢠Check that the circuit operating conditions do not exceed the specified limit of the
component.
â For non-repetitive surge operation,
â For repetitive surge operation,
â For normal operation.
⢠Check that the maximum value of the clamped voltage under the worst conditions
corresponds to the specification of the circuit.
a. Transil is a trademark of STMicroelectronics
July 2014
DocID3567 Rev 4
1/17
www.st.com
17
|
▷ |