AN3154 Datasheet, PDF (1/34 Pages) STMicroelectronics – CAN protocol used in the STM32 bootloader

AN3154
Application note
CAN protocol used in the STM32 bootloader
Introduction
This application note describes the CAN protocol used in the STM32 microcontroller
bootloader. It details each supported command. For more information about the CAN
hardware resources and requirements for your device bootloader, please refer to the
application note AN2606 “STM32 system memory boot mode”.
Type
Microcontrollers
Table 1. Applicable products
Part number or product series
STM32F1 series:
– STM32F105xx, STM32F107xx,
STM32F2 series
STM32F4 series:
– STM32F405xx, STM32F407xx
– STM32F415xx, STM32F417xx
– STM32F427xx, STM32F429xx
– STM32F437xx, STM32F439xx
May 2014
DocID017063 Rev 5
1/34
www.st.com