AN2658 Datasheet, PDF (1/23 Pages) STMicroelectronics – Using the analog to digital converter of the STM8S microcontroller

AN2658
Application note
Using the analog to digital converter of the STM8S microcontroller
Introduction
The purpose of this application note is to explain how to use the Analog to Digital Converter
implemented in many of the STM8S microcontroller family devices. It provides useful
information on how to configure the ADC registers and microcontroller resources and use
the ADC in different modes.
The STM8 firmware library, containing source code of all the examples described in this
application note, can be downloaded from the STMicroelectronics website: www.st.com.
July 2009
Doc ID 14152 Rev 2
1/23
www.st.com