AN2646 Datasheet, PDF (1/43 Pages) STMicroelectronics – Smartcard interface with the STM8S microcontroller

AN2646
Application note
Smartcard interface with the STM8S microcontroller
Introduction
This document describes a firmware and hardware smartcard interface solution based on
the STM8 UART1 peripheral. The main purpose of this firmware and hardware package is to
provide resources that facilitate the development of an application using the UART1
peripheral in smartcard mode.
The firmware interface consists of library source files developed so as to support the
ISO 7816-3/4 specification. An application example is also provided.
This document and its associated firmware are available for download from the
STMicroelectronics website: www.st.com.
August 2008
Rev 2
1/43
www.st.com