AN2430 Datasheet, PDF (1/24 Pages) STMicroelectronics – STR75x SystemMemory boot mode

AN2430
Application note
STR75x SystemMemory boot mode
Note:
Introduction
This application note describes the features of the SystemMemory boot mode developed for
STR75x Flash microcontrollers providing all the basic functionality to support the
programming of the embedded Flash. As well as the general features, this document also
covers the specific features of the UART boot mode.
The bootloader feature is unavailable on some devices soldered on development tools
(starter kits or evaluation boards). Please refer to Section 4 on page 22 for further
information.
January 2007
Rev 3
1/24
www.st.com