AN2165 Datasheet, PDF (1/18 Pages) STMicroelectronics – Getting Started with Keil μVision ST10 Toolchain

AN2165
Application note
ST10F27X Firmware Development
Getting Started with Keil µVision ST10 Toolchain
Introduction
This document provides an introduction to the Keil µVision toolchain (version 2) for the ST10F27x product
family. It summarizes the different steps needed to configure the Keil development toolset, to build and to
debug an application.
Although this application note cannot show all the topics relevant to the Keil tool, it demonstrates the first
steps necessary to get started with the compiler/debugger.
Two very simple software examples are supplied with this application note. The first is a small application
displaying a message on the toolset serial window. This example is used to show the required steps to
create a project, build and debug it. The second example illustrates how to use interrupts and the Logic
Analyser feature.
The application source files are provided within an archived file. This file can be unpacked into any
directory.
September 2013
Rev 2
1/18
www.st.com
18