AN2142 Datasheet, PDF (1/16 Pages) STMicroelectronics – This document provides an introduction to the Tasking toolchain

AN2142
Application note
ST10F27X firmware development
getting started with tasking ST10 toolchain
Introduction
This document provides an introduction to the Tasking toolchain (version v8.5 r1) for the ST10F27x
product family. It describes the software environment required to develop an ST10F27x application and
summarizes the different steps needed to configure the Tasking development toolset, to build and to
debug an application on the target hardware.
Two software examples are supplied with this application note. The first one is a small application
demonstrating an input / output toggling function. The required steps to create the project, build and
debug it will be described. The second one illustrates another example using interrupts. Both examples
are loaded and executed from an external RAM using Tasking RAM monitor.
The application source files are provided within an archived file. This file must be unpacked into a
directory before use.
September 2013
DocID11322 Rev 2
1/16
http:/www.st.com
16