|
AN2017 Datasheet, PDF (1/10 Pages) STMicroelectronics – DIFFERENT WAYS TO RESET ST7 MICROCONTROLLER | |||
|
AN2017
APPLICATION NOTE
DIFFERENT WAYS TO RESET ST7 MICROCONTROLLER
INTRODUCTION
The ST7 Microcontroller can be reset in several ways. This application note explains the dif-
ferent ways in which you can reset the ST7 MCU to make best use of them while designing
your application.
The various reset sources are:
â External Reset
â Internal Low Voltage Detect (LVD) Reset
â Internal Watchdog Reset
These sources act on the RESET pin and it is always kept low during delay phase. The Reset
service routine vector is fixed at address FFFEh-FFFFh in the ST7 memory map.
AN2017/0305
Rev. 1.0
1/10
1
|
▷ |