|
A7986A Datasheet, PDF (1/42 Pages) STMicroelectronics – 3 A step-down switching regulator for automotive applications | |||
|
A7986A
3 A step-down switching regulator for automotive applications
Datasheet - production data
Applications
⢠Dedicated to automotive applications
⢠Automotive LED driving
HSOP8 exposed pad
Features
⢠Qualified following AEC-Q100 requirements
⢠3 A DC output current
⢠4.5 V to 38 V input voltage
⢠Output voltage adjustable from 0.6 V
⢠250 kHz switching frequency, programmable
up to 1 MHz
⢠Internal soft-start and enable
⢠Low dropout operation: 100% duty cycle
⢠Voltage feed-forward
⢠Zero load current operation
⢠Overcurrent and thermal protection
⢠HSOP8 package
Description
The A7986A is a step-down switching regulator
with a 3.7 A (min.) current limited embedded
power MOSFET, so it is able to deliver up to 3 A
current to the load depending on the application
conditions.
The input voltage can range from 4.5 V to 38 V,
while the output voltage can be set starting from
0.6 V to VIN.
Requiring a minimum set of external components,
the device includes an internal 250 kHz switching
frequency oscillator that can be externally
adjusted up to 1 MHz.
The HSOP8 package with exposed pad allows
the reduction of Rth(JA) down to 40 °C/W.
Figure 1. Application circuit
August 2013
This is information on a product in full production.
DocID022801 Rev 5
1/42
www.st.com
42
|
▷ |