FLGA-SD Datasheet, PDF (1/2 Pages) STATS ChipPAC, Ltd. – Fine Pitch Land Grid Array - Stacked Die

FLGA-SD
Fine Pitch Land Grid Array - Stacked Die
• Stacking of die allows for more functionality
in an array molded, cost effective, space
saving package solution
• Available in 1.2mm (TFLGA), 1.0mm (VFLGA),
and 0.8mm (WFLGA) maximum thickness
• Thinner than FBGA
• Exposed thermal/mechanical lands available
• Laminate substrate based enabling
2 and 4 layers of routing flexibility
FEATURES
• 2 to 7 die stack with spacer capability
• Flexible body sizes range from 4mm x 4mm to
13mm x 13mm
• Package height at 1.0, 1.2, 1.4mm max
• Flexible die stacking options (“pyramid,” “same die,”
etc.)
• 0.5mm minimum land pitch, flexible land pattern
• Flash/SRAM/PSRAM/Logic/Analog combinations
• JEDEC standard package outlines
• Die thinning to 75um (3mils) capability
• Low loop wire bonding; reverse and die to die
• Up to 2mm die overhang per side
• Halogen-free and Low-K wafer compatible BOM
APPLICATIONS
• Handheld devices
• Wireless RF
• Analog
• ASIC
• Memory
• Simple PLDs
DESCRIPTION
STATS ChipPAC’s chip stack technology offers the flexibility
of stacking 2 to 7 die in a single package. Die to die bonding
capability enables device and signal integration to improve
electrical performance and reduce overall package I/O
requirements. Wafer thinning technology, overhang wire
bond technology, and the use of spacers between stacked
die provide the flexibility to stack almost any desirable
configuration of die in one package. This capability uses
existing assembly infrastructure, which results in more
functional integration with lower overall package cost. The
use of the latest packaging materials allows this package to
meet JEDEC Moisture Resistance Test Level 2a with
Lead-free reflow condition. This is an ideal package for cell
phone applications where Digital, Flash, SRAM, PSRAM
and Logic are stacked into a single package.
www.statschippac.com