CX11LHG Datasheet, PDF (2/2 Pages) EUROQUARTZ limited – Frequency Range 16MHz to 50MHz

SPECIFICATIONS
Specifications are typical at 25^OC unless otherwise noted. Spe-cifi-
cations are subject to change without notice.
Fundamental Frequency¹ 16.0 MHz
Motional Resistance R₁(Ω)
85
Motional Capacitance C₁ (fF) 1.5
24.0 MHz
30
1.6
32.0 MHz
25
1.9
Quality Factor Q (k)
80
150
110
Shunt Capacitance C₀ (pF)
0.7
0.7
0.9
Calibration Tolerance²
±100 to ±30 ppm, or tighter as required
Load Capacitance
10 pF (unless specified otherwise)
Drive Level
200 µW MAX
Frequency-Temperature
Stability^2,3
Aging, first year
Shock, survival
±50 ppm to ±10 ppm (Commercial)
±50 ppm to ±20 ppm (Industrial)
±100 ppm to ±30 ppm (Military)
5 ppm MAX
up to 75,000 g, 0.3 ms, 1/2 sine
Vibration, survival⁴
20 g, 10-2,000 Hz swept sine
Operating Temp. Range
Storage Temp. Range
-10^OC to +70^OC (Commercial)
-40^OC to +85^OC (Industrial)
-55^OC to +125^OC (Military)
-55^OC to +125^OC
Max Process Temperature 260^OC for 20 sec.
1. For frequencies above 50 MHz contact factory.
2. Other tolerances available. Contact factory.
3. Does not include calibration tolerance. The characteristics of the frequency stability over
temperature follow that of the AT thickness-shear mode.
4. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also available.
TERMINATIONS
Designation
SM1
SM2
SM3
SM4
SM5
Termination
Gold Plated
Solder Plated
Solder Dipped
Solder Plated (Lead Free)
Solder Dipped (Lead Free)
Max Process Temperature 260^OC for 20 sec.
EQUIVALENT CIRCUIT
PACKAGING OPTIONS
• Tray Pack
• 12 mm tape, 7”or 13” reels
Per EIA 481 (see Tape and Reel data sheet 10109)
HOW TO ORDER LOW PROFILE CX11LHG AT CRYSTALS
CX11L
S
HG3
C
SM1
— 24.0M , 100
/
100 / — /
I
Blank = Standard
S = Special or
custom
Blank = 5,000 g
HG1 = 10,000 g
HG2 = 20,000 g
HG3 = 30,000 g
HG4 = 50,000 g
HG5 = 75,000 g
C=
Ceramic Lid
SM1 = Gold Plated
SM2 = Solder Plated
SM3 = Solder Dipped
SM4 = Solder Plated
Lead Free
SM5 = Solder Dipped
Lead Free
Frequency
M = MHz
Calibration
Tolerance
@ 25⁰C
(in ppm)
Frequency
Stability over
Temp.Range
(in ppm)
Temp. Range:
C = -10^OC to +70^OC
I = -40^OC to +85^OC
M = -55^OC to +125^OC
S = Customer Specified
— /—
OR
/ 100
/I
Total
Frequency
Tolerance
(in ppm)
Temp. Range:
C = -10^OC to +70^OC
I = -40^OC to +85^OC
M = -55^OC to +125^OC
S = Customer Specified
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: [phone] www.statek.com
10193 Rev A