LXOM Datasheet, PDF (1/2 Pages) STATEK CORPORATION – Low Power Crystal Oscillator

LXOM OSCILLATOR
10 kHz to 2.1 MHz*
™
Low Power Crystal Oscillator
DESCRIPTION
The LXOM oscillator has the highest accuracy, stability and
lowest current of all STATEK oscillators. The design
consists of a CMOS-compatible hybrid circuit, packaged in
a hermetically-sealed, half-size metal DIP. Permanent,
precision tuning of the oscillator is accomplished by laser
trimming the crystal after it has been hermetically sealed in
a ceramic package and connected to the oscillator circuit.
This method of fine tuning allows for very tight calibration
tolerance and eliminates the need for a trimming capacitor,
a major source of long-term frequency drift. The
specifications and characteristics of the LXOM vary with
frequency. The characteristics of the 32.768 kHz model
are presented in this data sheet.
2T-32k
*Consult factory for other frequencies.
PACKAGE DIMENSIONS
FEATURES
Low power consumption
Low aging
CMOS compatible
Double hermetically sealed package
Full military testing available
3 Volt operation available
APPLICATIONS
Industrial, Computer & Communications
General purpose clock oscillator
Data Logger
Remote sensor
Liquid level sensing
Medical test and diagnostics
Military
Portable field communication
Military high speed modem
Flight recorder
E
D
C
PIN
NO.1
F
H
G
PIN
NO.4
AB
PIN
NO.8
PIN
NO.5
DIM
INCHES
A
0 .505 MAX.
B
0 .300 ^+_ 0.005
C
0 .430 TYP.
D
0 .225 MAX.
E
0 .025 MAX.
F
0 .150 MIN.
G
0 .018 ^+_ 0.002
H
0 .063 TYP.
* Position of bumps for reference only
mm
12.83 MAX.
7 .62 ^+_ 0.13
10.92 TYP.
5.72 MAX.
0.64 TYP.
3.81 MIN.
0 .46 ^+_ 0.05
1.60 TYP.
10145- Rev D
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: [phone] www.statek.com