LSM_13 Datasheet, PDF (1/2 Pages) STATEK CORPORATION – Low Power Surface Mount Crystal Oscillator

LSM OSCILLATOR
30 kHz to 400 kHz
Low Power Surface Mount Crystal Oscillator
DESCRIPTION
The LSM oscillator is an ultra-low current quartz crystal
oscillator with a typical start-up time of 500ms. The
design consists of a STATEK crystal, and a CMOS-
compatible integrated circuit. The hybrid design is
hermetically-sealed with a kovar lid in a surface mount
ceramic package. Permanent precision tuning of the
oscillator is accomplished by laser trimming the crystal.
PACKAGE DIMENSIONS
FEATURES
Ultra-low power consumption
Typical start-up time of 500ms
Typical rise and fall times of 25ns
Hermetically sealed ceramic package
Optional output enable/disable with Tri-State
Full military testing per MIL-PRF-55310 available
Designed, manufactured, and tested in the USA
3.3 volt operation available
APPLICATIONS
Industrial, Computer & Communications
General purpose clock oscillator
Data logger
Remote sensor
Real time clock
Medical test and diagnostics
Military
Portable field communication
Military high speed modem
Flight recorder
23
14
F
TYPICAL
MAXIMUM
DIM
inches
mm
inches
mm
A
0.400 10.16
0.405 10.29
B
0.180
4.57
0.185 4.70
C*
0.071
1.80
0.079 2.00
D
0.200
5.08
0.205 5.21
E
0.080
2.03
0.085 2.16
F
0.050
1.27
0.058 1.47
G
0.055
1.40
0.063 1.60
Termination material is Au over Ni (SM1), solder dip
(SM3) also available.
*SM1 Termination; SM3 = 0.084 in. (2.13mm) Max.
SUGGESTED LAND PATTERN
0.075 (1.91)
GRID
PLACEMENT
COURTYARD
0.068 (1.73)
0.064 (1.63)
0.132 (3.35)
inches (mm)
0.200 (5.08)
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: [phone] www.statek.com
10151 - Rev D