CXO3MHG_12 Datasheet, PDF (1/2 Pages) STATEK CORPORATION – High Shock, Low-Profile Miniature Surface-Mount 3.3 V Crystal Oscillator

CXO3MHG OSCILLATOR
200 kHz to 200 MHz
High Shock, Low-Profile Miniature
Surface-Mount 3.3 V Crystal Oscillator
DESCRIPTION
Intended for applications requiring shock survivability to
10,000 g (and higher), Statek’s surface-mount CXO3MHG
oscillators are high-shock versions of the CXO3M oscillators.
These oscillators consist of a Statek miniature quartz crystal
and a CMOS/TTL compatible hybrid circuit in a low-profile
ceramic package with an extremely small footprint.
FEATURES
High shock resistance
3.3 V operation
Designed for surface mount applications using infrared,
vapor phase, or epoxy mount techniques
CMOS and TTL compatible
Low power consumption
Optional Output Enable/Disable with Tri-State
Low EMI emission
Full military testing available
APPLICATIONS
Military & Aerospace
Smart munitions
Projectile electronics
Industrial
Engine control
Down-hole drilling
SUGGESTED LAND PATTERN
0.067 (1.70)
0.070 (1.78)
DIMENSIONS
A
TOP
B
C
TYPICAL
DIM
inches
mm
A
0.256
6.50
B
0.197
5.00
C (SM1)
0.051
C (SM3/SM5) 0.055
1.30
1.40
D
0.055
1.40
E
0.060
1.52
D
2
3
BOTTOM
1
4
D
E
MAXIMUM
inches
mm
0.263 6.68
0.204 5.18
0.055
0.063
1.40
1.60
0.065 1.65
0.070 1.78
0.201 (5.11)
0.065 (1.65)
0.136 (3.45)
PIN CONNECTIONS
1. Enable/Disable (E or T) or not connected (N)
2. Ground
3. Output
4. V_DD
0.137 (3.48)
GRID
PLACEMENT
COURTYARD
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: [phone] www.statek.com
10172 Rev. C
YSTEM ^CERTIFICAT
01