ST8835 Datasheet, PDF (1/13 Pages) Stanson Technology – Green-Mode PWM Controller

ST8835
Green-Mode PWM Controller
DESCRIPTION
The ST8835 is low cost, startup current, current mode PWM controller with green-mode power-saving
operation. The integrated functions include the leading-edge blanking of the current sensing, internal
slope compensation. It would provide the users a superior AC/DC power application of higher efficiency,
low external compotation of higher efficiency, low external component counts, and lower cost solution
for applications.
The ST8835 features more protections or functions for the following characteristics∶
☆Add OLP (Over Load Protection) function to provide better protection performance for fault conditions
the OVP ( Over Voltage Protection ) mechanism form the cycle-by-cycle mode to the hiccup mode.
ST6853 is available by SOT-23-6L / DIP-8P packages.
PIN CONFIGURATION
SOT-23-6L / DIP-8P
APPLICATUONS
* AC/DC Switching Power Adaptor
* Battery Charger
* PC 5V Standby Power
* Open-Farme Switching Power Supply
PART MARKING
SOT-23-6L / DIP-8P
FATURES
* High-Voltage BiCNOS Process
* Very Low Startup Current (<20uA)
* Under Voltage Lockout (UVLO)
* Current Mode Control
* Non-audible-noise Green Mode Control Current
Limiting
* LEB (Leading-Edge Blanking) on CS Pin
* OLP (Over Load Protection)
* OVP (Over Voltage Protection) on Vcc Pin
* Leading-Edge Blanking
* Programmable Switching Frequency
* Internal Slope Compensation
* Green-Mode Control for Power Saving
* 300mA Driving Capability
Y: Year Code W: Process Code
120 Bentley Square, Mountain View, Ca 94040 USA
www.stansontech.com
ST8835 2008. Rev. 1