PS1192FB Datasheet, PDF (8/10 Pages) STANLEY ELECTRIC CO.,LTD. – Surface Mount Phototransistor/Right Angle Type

Reflow Soldering Conditions
PS1192FB
Surface Mount Phototransistor/Right Angle Type
1) The above profile temperature gives the maximum temperature of the device resin surface.
Please set the temperature so as to avoid exceeding this range.
2) Total times of reflow soldering process shall be no more than 2 times.
When the second reflow soldering process is performed, intervals between the first
and second reflow should be short as possible (while allowing some time for the
component to return to normal temperature after the first reflow) in order to prevent the
device from absorbing moisture.
3) Temperature fluctuation to the device during the pre-heating process shall be minimized.
Manual Soldering Conditions
Iron tip temp.
Soldering time and frequency
350 ℃
3s
1 time
(MAX.) (30 W Max.)
(MAX.)
(MAX.)
2005.3.2
Page 8