STM-2016 Datasheet, PDF (4/7 Pages) Stanford Microdevices – 1800 - 2200 MHz High Linearity Silicon Germanium Active Transmit Mixer

Pin Out Description
Pin #
Function
Description
1
VEE
Ground
2
VCC
Positive supply (+5V)
3
VEE
Ground
4
RFN
RF input, negative terminal
5
RFP
RF input, positive terminal
6
VEE
Ground
7
VCC
Positive supply (+5V)
8
IFN
IF output, negative terminal
9
IFP
IF output, positive terminal
10
VCC
Positive supply (+5V)
11
VEE
Ground
12
LOP
LO input, positive terminal
13
LON
LO input, negative terminal
14
VEE
Ground
15
VCC
Positive supply (+5V)
16
VEE
Ground
Advanced Data Sheet
670  0+] 7UDQVPLW 0L[HU
Additional Comments
Nominal DC voltage is 2.3V. (Internally biased) Output should be
AC-coupled.
Nominal DC voltage is 2.3V. (Internally biased) Output should be
AC-coupled.
Nominal DC voltage is 2.2V. (Internally biased) Input should be AC-
coupled
Nominal DC voltage is 2.2V. (Internally biased) Input should be AC-
coupled
Nominal DC voltage is 2.3V. (Internally biased) Input should be AC-
coupled.
Nominal DC voltage is 2.3V. (Internally biased) Input should be AC-
coupled.
The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions.
Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without
notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices
product for use in life-support devices and/or systems.
Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved.
522 Almanor Ave., Sunnyvale, CA 94086
Phone: (800) SMI-MMIC
http://www.stanfordmicro.com
4
05/04/01 rev 1.0