SST85LD0128 Datasheet, PDF (1/73 Pages) Silicon Storage Technology, Inc – NANDrive

NANDrive
SST85LD0128 / SST85LD0256 / SST85LD0512
FEATURES:
• Industry Standard ATA/IDE Bus Interface
– Host Interface: 8- or 16-bit access
– Supports up to PIO Mode-4
– Supports up to Multi-word DMA Mode-2
• Low Power, 3.3V Power Supply
• 5.0V or 3.3V host interface through V_DDQ pins
• Low current operation:
– Active mode: 80 mA Max.
– Sleep mode: 150 µA Max.
• Power Management Unit
– Immediate disabling of unused circuitry
• Expanded Data Protection
– WP_PD# pin configurable by firmware for
prevention of data overwrites
– Added data security through user-selectable
protection zones
• 20-byte Unique ID for Enhanced Security
– Factory Pre-programmed 10-byte Unique ID
– User-Programmable 10-byte ID
• Integrated Voltage Detector
– Industrial Temperature Device requires external
POR# signal
• Endurance
– Greater than 100,000 cycles with data wear leveling
• Data Retention
– 10 years
Advance Information
• Pre-programmed Embedded Firmware
– Executes industry standard ATA/IDE commands
– Implements dynamic wear-leveling algorithms to
substantially increase the longevity of flash media
– Embedded Flash File System
– Built-in ECC corrects up to 3 random 12-bit
symbols of error per 512-byte sector
• Internal or External System Clock Option
• Capacity Expansion Using External Flash Media
Devices
– Automatic Recognition and Initialization of Flash
Media Devices
– Seamless integration into a standard SMT
manufacturing process
• Multi-tasking Technology enables Fast
Sustained Write Performance (Host to Flash)
– Up to 8 MB/sec without extended NAND Flash
– Up to 10 MB/sec with extended NAND Flash
• Fast Sustained Read Performance (Flash to Host)
– Up to 10 MB/sec
• Commercial and Industrial Temperature Ranges
– 0°C to 70°C for commercial operation
– -40°C to +85°C for industrial operation
• Industry’s smallest 12mm x 18mm LBGA package
• All non-Pb (lead-free) devices are RoHS compliant
PRODUCT DESCRIPTION
The SST85LD0128, SST85LD0256, and SST85LD0512
NANDrive™ integrated circuits (IC) are high-performance,
fully-integrated, embedded flash solid state drives. They
combines an integrated ATA Controller and a 128/256/512
MB NAND Flash die in a multi-chip package. These
products are well suited for solid state mass storage
applications offering new and expanded functionality while
enabling cost effective designs.
ATA-based solid state mass storage technology is widely
used in such products as portable and desktop
computers, digital cameras, music players, handheld
data collection scanners, cellular phones, PCS phones,
PDAs, handy terminals, personal communicators,
advanced two-way pagers, audio recorders, monitoring
devices, and set-top boxes. SST NANDrive IC supports
standard ATA/IDE protocol with up to PIO Mode-4 and
Multi-word DMA Mode-2 interface.
The NANDrive is a single device, solid state drive that is
designed for embedded systems using standard ATA/IDE
protocol. It has built in microcontroller and file management
firmware that communicates with ATA standard interfaces;
therefore, the device does not require additional or
proprietary software such as Flash File System (FFS) and
Memory Technology Driver (MTD) software.
The NANDrive provides complete IDE Hard Disk Drive
functionality and compatibility in the industry’s smallest
12mmx18mm BGA package for easy, space saving, and
cost effective mounting to a system motherboard. It is a
perfect solution for portable, consumer and OEM,
electronic products requiring smaller and more reliable data
storage.
The SST85LD0128/0256/0512 NANDrive devices offer
added security protection for confidential information stored
in the flash media. They allow up to four protection zones
which can be set by the user to be Read-only or Hidden
(Read-disabled). The SST85LD0128/0256/0512 accesses
data within the protected zones through a password-
protected command. The NANDrive also provides a
WP_PD# pin to protect critical information stored in the
flash media from unauthorized overwrites.
The NANDrive devices come pre-programmed with a 10-
byte unique serial ID. For even greater system security, the
user has the option of programming an additional 10 Bytes
of ID space to create a unique, 20-byte ID. Additionally, the
capacity of the NANDrive products can be easily expanded
by connecting discrete NAND flash components through
the external Media bus.
©2007 Silicon Storage Technology, Inc.
S71319-03-000
2/07
1
The SST logo, NANDrive, and SuperFlash are registered trademarks of Silicon Storage Technology, Inc. Some content is reproduced from the Com-
pactFlash Specification (2.0) by permission of the CompactFlash Association. Other content is reproduced from the ATA/ATAPI-6 (T13/1410D revision
3b) specification by permission of the National Committee for Information Technology Standards. These specifications are subject to change without