SST12LP10 Datasheet, PDF (1/12 Pages) Silicon Storage Technology, Inc – 2.4 GHz High-Linearity Power Amplifier

2.4 GHz High-Linearity Power Amplifier
SST12LP10
FEATURES:
SST12LP102.4 GHz High-Linearity Power Amplifier
Preliminary Specifications
• High Gain:
– >26 dB gain across 2.4~2.5 GHz over tempera-
ture 0°C to +80°C
• High linear output power:
– ~27 dBm P1dB
– Meets 802.11g OFDM ACPR requirement up to
23 dBm
– Over 20 dBm linear output with total system
EVM<5% for 54 Mbps 802.11g signal
– Meets 802.11b ACPR requirement up to 24 dBm
• High power-added efficiency/Low operating
current for both 802.11g/b applications
– ~19% @ P_OUT = 20 dBm for 802.11g
– ~30% @ P_OUT = 24 dBm for 802.11b
• Ultra-low Reference Current
– ~3 mA Total I_REF
• Low idle current
– ~60 mA I_CQ
• High-speed power-up/down
– Turn on/off time (10%~90%) <100 ns
– Typical power-up/down delay with driver delay
included <200 ns
• High temperature stability
– ~1 dB gain/power variation between 0°C to +80°C
• Low shut-down current (< 0.1 µA)
• Simple input/output matching
• Packages available
– 16-contact VQFN (3mm x 3mm)
– Non-Pb (lead-free) packages available
APPLICATIONS:
• WLAN (IEEE 802.11g/b)
• Home RF
• Cordless phones
• 2.4 GHz ISM wireless equipment
PRODUCT DESCRIPTION
The SST12LP10 is a high-performance power amplifier
based on the highly-reliable InGaP/GaAs HBT technology.
The SST12LP10 can be easily configured for high-power,
high-efficiency applications with superb power-added effi-
ciency while operating over the 2.4~2.5 GHz frequency
band. It provides over 26 dB gain with 19% power-added
efficiency @ POUT = 20 dBm for 802.11g and 30% power-
added efficiency @ POUT = 24 dBm for 802.11b.
The SST12LP10 has excellent linearity (over 20 dBm linear
output with total system EVM<5%) which is essential for 54
Mbps 802.11g operation.
The power amplifier IC also features easy board-level
usage along with high-speed power-up/down control and
ultra-low reference current (~3 mA). These features cou-
pled with low operating current make the SST12LP10 ideal
for the final stage power amplification in battery-powered
802.11g/b WLAN transmitter applications.
The SST12LP10 is offered in 16-contact VQFN package.
See Figure 1 for pin assignments and Table 1 for pin
descriptions.
©2005 SST Communications Corp.
S71280-00-000
1/05
1
The SST logo and SuperFlash are registered Trademarks of Silicon Storage Technology, Inc.
These specifications are subject to change without notice.