STR8083 Datasheet, PDF (5/9 Pages) Solid State Optronic – AC Solid State Relay

STR8083 Solder Temperature Profile Recommendations
STR8083
Random Phase
800V / 1.2A
AC Solid State Relay
(1) Infrared Reflow:
Refer to the following figure as an example of an optimal temperature profile for single occurrence infrared reflow.
Soldering process should not exceed temperature or time limits expressed herein. Surface temperature of device
package should not exceed 250ºC:
G
F
D
E
H
B
A
C
Process
Step
A
B
C
D
E
F
G
H
Figure 1
Description
Preheat Start Temperature (ºC)
Preheat Finish Temperature (ºC)
Preheat Time (s)
Melting Temperature (ºC)
Time above Melting Temperature (s)
Peak Temperature, at Terminal (ºC)
Dwell Time at Peak Temperature (s)
Cool-down (ºC/s)
Parameter
150ºC
180ºC
90 - 120s
230ºC
30s
260ºC
10s
<6ºC/s
(2) Wave Solder:
Maximum Temperature:
Maximum Time:
Pre-heating:
Single Occurrence
(3) Hand Solder:
Maximum Temperature:
Maximum Time:
Single Occurrence
260ºC (at terminal)
10s
100 - 150ºC (30 - 90s)
350ºC (at tip of soldering iron)
3s
© 2014 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 5 of 9
STR8083 H/S/TR
Rev 2.20 (09/26/2014)
002170