TD3063 Datasheet, PDF (1/5 Pages) Solid State Optronic – Zero-Volt Switching Triac Driver

TD3063
Zero-Volt Switching
Triac Driver
DESCRIPTION
The TD3063 consists of a single input LED optically coupled to a zero-volt crossing triac driver. The TD3063 provides high input-to-output
isolation and is designed to drive high-powered triacs. Typical uses include interfacing logic level control signals to equipment powered
from 110Vac and 220Vac lines.
FEATURES
• ^{Zero-volt switching}
• ^{600V blocking voltage}
• ^{High input-to-output isolation (5kV)}
• ^{Low trigger current (5mA MAX)}
• ^{High reliability}
OPTIONS/SUFFIXES*
• ^{-S Surface Mount Leadform Option}
• ^{-TR Tape and Reel Option}
• ^{-V Signifies VDE approval}
• ^{-H 0.4" Lead Spacing (see mechanical dimension)}
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
1
+ Input
6
+/- AC Output
- Input
2
5 Do Not Use
3
4 ^{-/+ AC Output}
APPLICATIONS
• ^{Home appliances}
• ^{Motor/ Drive controls}
• ^{Solid state relays}
• ^{Solenoid / Valve control}
• ^{Temperature Control}
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
85
Continuous Input Current mA
50
Transient Input Current
mA
400
Reverse Input Control
V
6
Voltage
Total Power Dissipation
mW
330
Soldering Temperature
ºC
260
(10s)
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• ^{UL and C-UL Approved File # E201932}
• ^{VDE Approved, Lic # 40011225}
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
TD3063
rev 1.40 (10/25/2004)