TD3052 Datasheet, PDF (1/5 Pages) Solid State Optronic – Random Switching Triac Driver

TD3052
Random Switching
Triac Driver
DESCRIPTION
The TD3052 consists of an AlGaAs LED optically coupled to a Random Phase triac driver chip. The TD3052 provides high input-to-
output isolation and is designed to drive high-powered triacs. Typical uses include interfacing logic level control signals to equipment
powered from 110Vac and 220Vac lines.
FEATURES
• ^{Random phase switching}
• ^{600V blocking voltage}
• ^{High input-to-output isolation (5kV MIN)}
• ^{10mA turn-on (trigger) current}
• ^{High reliability}
APPLICATIONS
• ^{Home appliances}
• ^{Motor control}
• ^{Solid state relays}
• ^{Valve control}
• ^Solenoids
• ^Dimmers
• ^{High Power Triacs}
OPTIONS/SUFFIXES*
• ^{-H 0.4" Lead spacing (see mechanical dimensio}
• ^{-S Surface Mount Leadform Option}
• ^{-TR Tape and Reel Option}
• ^{-V Signifies VDE approval}
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
1
+ Input
2
- Input
3
6
+/- AC Output
5
Do Not Use
4
-/+ AC Output
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
85
Continuous Input Current mA
40
Transient Input Current
mA
400
Reverse Input Control
Voltage
V
6
Output Power Dissipation mW
500
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• ^{UL / C-UL Approved File #E201932}
• ^{VDE Approved, Lic # 40011225}
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
TD3052
rev 1.40 (10/25/2004)