TD3023 Datasheet, PDF (1/5 Pages) Solid State Optronic – Random Phase Switching

TD3023
Random Phase Switching
Triac Driver
DESCRIPTION
The TD3023 consists of a single input LED optically coupled to a random phase triac driver chip. The TD3023 provides high input-to-
output isolation and is designed to drive high-powered triacs. Typical uses include interfacing logic level control signals to equipment
powered from 110Vac and 220Vac lines.
FEATURES
• ^{Random phase switching}
• ^{400V blocking voltage}
• ^{5mA turn-on current}
• ^{High input-to-output isolation}
• ^{High reliability}
OPTIONS/SUFFIXES*
• ^{-H 0.4" (10.16mm) Lead spacing (VDE0884)}
• ^{-S Surface Mount Leadform Option}
• ^{-TR Tape and Reel Option}
• ^{-V Signifies VDE approval}
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
1
+ Input
- Input
2
3
6
+/- AC Output
5 Do Not Use
4 ^{-/+ AC Output}
APPLICATIONS
• ^{Home Appliances}
• ^{Motor Control}
• ^{Solid State Relays}
• ^{Valve Control}
• ^Solenoids
• ^Dimmers
• ^{High Power Triacs}
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
85
Continuous Input Current mA
40
Transient Input Current
mA
400
Reverse Input Control
Voltage
V
6
Output Power Dissipation mW
500
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• ^{UL / C-UL Approved File #E201932}
• ^{VDE Approved, Lic # 40011225}
© 2008 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
TD3023
rev 1.41 (12/22/2008)