SPT601 Datasheet, PDF (1/5 Pages) Solid State Optronic – DC Input PhotoSCR

SPT601
DC Input
PhotoSCR
DESCRIPTION
The SPT601 consists of an AlGaAs LED optically coupled to a photo-sensitive SCR. Optical coupling provides high isolation levels while
maintaining low-level DC signal control capability. With high load voltage and low input current, the SPT601 is an ideal solution to drive
SCR Triacs and Solid State Relays.
FEATURES
• ^{Low input control current (5mA MAX)}
• ^{High blocking voltage (400V MIN)}
• ^{400mA maximum continuous current}
• ^{High input-to-output isolation (3.75kV MIN, 5.3kV MAX)}
• ^{High Transient Immunity (dV/dt = 400V/us MIN)}
• ^{RoHS compliant / LeadFree Component}
• ^{Solid state reliability}
OPTIONS/SUFFIXES*
• ^{-H High Input-Output Isolation (5.3kVrms)}
• ^{-S Surface Mount Leadform Option}
• ^{-TR Tape and Reel Option}
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
APPLICATIONS
• ^{Valve control}
• ^Solenoids
• ^{Remote switching}
• ^{Home appliances}
• ^{Metering equipment}
• ^{Heating elements}
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
85
Continuous Input Current mA
40
Transient Input Current
mA
400
Reverse Input Control
Voltage
V
6
Total Package Power
mW
500
Dissipation
Surge Current Rating
A
10
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• ^{UL, C-UL Pending}
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
SPT601
rev 1.40 (10/25/2004)