SMQ4110 Datasheet, PDF (1/8 Pages) Solid State Optronic – MOSFET Output Solid State Relay

SMQ4110
Quad 1 Form A
250V / 300Ω
MOSFET Output Solid State Relay
Description
The SMQ4110 is a bi-directional, quad-pole, single-throw,
normally open MOSFET output solid-state relay. This
device offers four discrete and independently controlled
optically isolated SSRs in one miniature 16 pin SOIC
package. Each discrete relay consists of an infrared LED,
optically coupled to a Photo Diode Array, which in turn
drives a pair of back-to-back enhancement MOSFETs. The
output structures offer very fast switching speeds (50S
TYP) and very low leakage current (10nA TYP).
The SMQ4110 comes standard in a 16 SOIC package.
Applications
 Data Acquisition
 Meter Reading Systems
 Medical Equipment
 Battery Monitoring
 Multiplexers
Schematic Diagram
(+) Input (Pole 1) 1
(-) Input (Pole 1) 2
(+) Input (Pole 2) 3
(-) Input (Pole 2) 4
(+) Input (Pole 3) 5
(-) Input (Pole 3) 6
(+) Input (Pole 4) 7
(-) Input (Pole 4) 8
SMQ4110
16 (+/-) Load (Pole 1)
15 (-/+) Load (Pole 1)
14 (+/-) Load (Pole 2)
13 (-/+) Load (Pole 2)
12 (+/-) Load (Pole 3)
11 (-/+) Load (Pole 3)
10 (+/-) Load (Pole 4)
9 (-/+) Load (Pole 4)
Features
 Quad Pole Switching / Small 16 SOIC Package
 Fast Turn On Speed (<50S TYP)
 Ultra Low Leakage Current (<10nA TYP)
 40mA Maximum Continuous Load Current
 High Isolation Voltage (2.5kV_RMS)
 Long Life / High Reliability
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL / C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature ………………………-40 to +85°C
Continuous Input Current ………………………………..40mA
Transient Input Current ………………….……………..400mA
Reverse Input Control Voltage …………..…………………5V
Input Power Dissipation…………………………………70mW
Total Power Dissipation ……………………………..500mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
Ordering Information
Part Number Description
SMQ4110
16 pin SOIC, (46/Tube)
SMQ4110-TR 16 pin SOIC, Tape and Reel (1000/Reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
© 2013 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 8
SMQ4110 /TR
Rev 2.00 (11/25/2013)
001754