SG6504 Datasheet, PDF (1/8 Pages) Solid State Optronic – Industrial Inverters

SG6504
1A Output Current
IGBT Gate Drive Optocoupler
Description
The SG6504 is an optically coupled 1A Output Current Gate
Driver, designed to drive most 1200V / 50A IGBTs and
MOSFETs. It is intended for driving high power IGBTs and
MOSFETs used in motor control inverter applications. For
IGBTs or MOSFETs with higher ratings, the SG6504 can be
used to drive a discrete power stage which in turn will drive
the IGBT or MOSFET gate.
The circuit consists of an infrared input LED optically coupled
to an integrated circuit which utilizes a high speed driver.
The SG6504 comes in a wide body S0-6 package, available
in either a standard toe-to-toe width (9.7mm, order code “P”)
or in a stretched toe-to-toe width (11.5mm, order code “W”).
Schematic Diagram
Anode 1
Do Not Use 2
Cathode 3
SHIELD
SG6504
6 V_CC
5 V_O
4 V_EE
Truth Table (Positive Logic)
LED
High Side
OFF
OFF
ON
ON
Low Side
ON
OFF
VO
LOW
HIGH
** A 0.1μF bypass Capacitor must be connected between
pins 4 & 6 (V_EE & V_CC) – reference Note 8 on page 4
Applications
 IGBT / MOSFET Gate Drives
 AC & Brushless DC Motor Drives
 Industrial Inverters
 Uninterruptable Power Supplies (UPS)
 Switch Mode Power Supplies
Features
 High Common Mode Rejection: 25kV/S
minimum @ VCM = 1500V
 1A Maximum Peak Output Current
 Fast Switching Speeds
o 500nS Maximum Propagation Delay
o 300nS Maximum Propagation Delay Difference
 ICC=3.5mA Maximum Supply Current
 Wide Supply Voltage (VCC) Range (10V to 30V)
 Under Voltage Lockout Protection (UVLO) with
Hysteresis
 Broad Temperature Performance Range
(-40°C to 100°C)
 Rail-to-Rail Output Voltage
 High Input to Output Isolation (5kVRMS)
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
 UL/C-UL Approval - Pending
 VDE (EN60747-5-5) Approval - Pending
Ordering Information
Part Number Description
SG6504-P
SG6504-W
SG6504-(x)TR
Wide body SO-6, standard lead spacing (100/Tube)
Wide body SO-6, stretched lead spacing (100/Tube)
Wide body SO-6, Tape and Reel (1000/Reel)
NOTES:
 Suffixes listed above are not included in marking on
device for part number identification
 For lead spacing details, reference package
dimensions on page 7
© 2015 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 8
SG6504-(P/W) /TR
Rev00 (06/03/2015)
002520