SDT600 Datasheet, PDF (1/6 Pages) Solid State Optronic – DC Input Optocoupler

SDT600
DC Input
Optocoupler
DESCRIPTION
The SDT600 consists of a phototransistor optically coupled to a light emitting diode. Optical coupling between the input LED and output
phototransistor allows for high isolation levels while maintaining low-level DC signal control capability. The SDT600 provides an optically
isolated method of controlling many interface applications such as telecommunications, industrial control and instrumentation circuitry.
FEATURES
• ^{High input-to-output isolation package (5000 Vrms)}
• ^{Low input power consumption}
• ^{High stability}
• ^{6 Pin DIP Package w/output Base Connection}
• ^{CTR range 50-600%}
OPTIONS/SUFFIXES*
• ^{-H .04" (10.16mm) lead spacing option (VDE0884)}
• ^{-S Surface Mount Leadform Option}
• ^{-TR Tape and Reel Option}
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
1. Anode
1
4
2. Cathode
3. NC
2
5
4. Emitter
3
6
5. Collector
6. Base
APPLICATIONS
• ^{Switch mode power supplies}
• ^{Copiers, registers, vending machines}
• ^{Computer terminals, PLCs}
• ^{Telecom / Datacom}
• ^{Home appliances}
• ^{Digital logic inputs}
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
100
Continuous Input Current mA
50
Transient Input Current
A
1
Reverse Input Control
V
6
Voltage
Output Power Dissipation mW
500
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• ^{UL C-UL Approved, File # E201932}
• ^{VDE Approved, Lic 40011227}
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 6
SDT600
rev 1.40 (10/25/2004)