SDT450 Datasheet, PDF (1/6 Pages) Solid State Optronic – DC Input Optocoupler

SDT450
DC Input
Optocoupler
DESCRIPTION
The SDT450 consists of a phototransistor optically coupled to a light emitting diode. Optical coupling between the input LED and output
phototransistor allows for high isolation levels while maintaining low-level DC signal control capability. The SDT450 provides an optically
isolated method of controlling many interface applications such as telecommunications, industrial control and instrumentation circuitry.
FEATURES
• ^{Ultra miniature 4-pin small outline package}
• ^{High input-to-output isolation package (3,750 Vrms)}
• ^{CTR Range: 50%-600%}
OPTIONS/SUFFIXES*
• ^{-TR Tape and Reel}
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
1
+ Input
4
Collector
2
- Input
3
Emitter
APPLICATIONS
• ^{Home Appliances}
• ^{Office Automation Equipment}
• ^{Vending Machines}
• ^{Digital logic inputs}
• ^{Power Supplies}
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
100
Input Forward Current
mA
50
Input Peak Forwad Current A
1
Reverse Input Voltage
V
6
Total Power Dissipation
mW
170
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• ^{UL / C-UL Approved File #E201932}
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 6
SDT450
rev 1.40 (10/25/2004)