SDD600_15 Datasheet, PDF (1/10 Pages) Solid State Optronic – Low input power consumption

SDD600
DC Input
300V
Photo-Darlington Optocoupler
Description
The SDD600 consists of a high voltage photo-Darlington
transistor optically coupled to a light emitting diode. Optical
coupling between the input IR LED and output photo-
Darlington allows for high isolation levels while maintaining
low-level DC signal control capability. The SDD600
provides an optically isolated method of controlling many
interface applications such as telecommunications,
industrial control, and instrumentation circuitry
The SDD600 comes standard in a miniature 6 pin DIP
package.
Applications
• Office Automation Equipment
• System Appliances, Measuring Instruments
• Computer Terminals, PLCs
• Telecom / Datacom
• Home Appliances
• Digital Logic Inputs
• Fax / Modems
• Power Supplies
Schematic Diagram
+ Input ₁
(Anode)
- Input ₂
(Cathode)
6 ^Base
5 ^Collector
Features
• High Load Voltage (V_CEO = 300V MIN)
• High Current Transfer Ration (CTR: 600-9000%)
• Low input power consumption
• High stability
• High Isolation Voltage (5000V_RMS)
• Long Life / High Reliability
• RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL:
C-UL:
VDE:
File # E201932
File # E201932
License # 40011227
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature ………………………-40 to +100°C
Continuous Input Current ………………………………..50mA
Transient Input Current ………………….……………..500mA
Reverse Input Control Voltage …………..…………………6V
Input Power Dissipation…………………………………40mW
Total Power Dissipation ……………………………..200mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
NC ₃
SDD600
4 ^Emitter
Ordering Information
Part Number Description
SDD600
SDD600-H
SDD600-S
SDD600-STR
6 pin DIP, (65/Tube)
0.40” (10.16mm) Lead Spacing (VDE0884)
6 pin SMD, (65/Tube)
6 pin SMD, Tape and Reel (2000/Reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
© 2011 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 10
SDD600/H/S/TR
Rev 2.00 (08/01/20011